Lighting Designers and Operators
Current lighting equipment
• Zero 88 Leap Frog 48 programmable lighting desk – a variety of manual and programmable features, e.g. presets, memories, flash/solo, chases, plus audio effects triggered through stereo ¼” line-in jack
• The board has an audio input feed from the sound desk
• The board is connected to a wi-fi router and can be remotely controlled using the Zero88 app
• Four Anytronics 6-way dimmer racks (channels 1-24)
• One Betapack 6-way dimmer rack (channels 25-30)
- controlled via a demux (Botex Multi-Exchanger ME72) and analogue control cable
- 8-pin DIN control: Pin 1-6 = Channel 1-6 (0-10v), Pin 7 = Power (+20v), Pin 8 = Ground
- Adjacent to No. 2 patch panel, useful for practicals and other specials
- Lighting desk must be set to wide mode to use these channels. See user manual.
• Racks A & B (top row) share a single 32A mains supply and are limited to a total of 7kW load across both, e.g. 3½kw each
• Racks C & D (bottom row) have their own individual 32A mains supplies so are limited to 7kW load each
• In addition, there are two ACT6 racks and an Action 24 board using an analogue multiplex (D54) interface (system not currently in use)